Access and intrusion alarm with push / email messages in real time
The air-Q has an integrated access and intrusion alarm. If this is activated, every access is registered and triggers a push and mail notification. The access alarm is very sensitive. It is recommended to activate it only when the room is not in use (e.g. during vacations).
The access alarm is based on the analysis of various sensors that individually and in combination detect an access.
Fire alarm and smoke alarm with push / mail messages
01
The air-Q has an integrated fire alarm (or smoke alarm), which triggers an acoustic and visual alarm on the device. Through the connection of several high-quality sensors, the air-Q acts as a very fine and precise smoke detector that triggers decisively earlier. Optionally, the fire / smoke alarm can also be configured as a push message and mail notification.
Depending on the presence of the corresponding sensors, the fire alarm is triggered at the following thresholds:
Note: The air-Q cannot be used as a legal smoke detector, as requirements for installation location and independence from mains power are not met for this. The air-Q is powered by a power cable and not by batteries. However, the air-Q can complement the existing smoke detector, already to potentially dangerous situations through more sensors more accurately detect and notify and thus also - possibly decisively - earlier alarm.
Limit values for the air-Q fire / smoke alarm
Depending on the presence of the corresponding sensors, the fire alarm is triggered at the following thresholds:
