Offline alarm with push / mail messages in real time
The air-Q offline alarm is triggered when the air-Q loses connection to the Internet. This can happen when the power fails e.g. due to a power outage. A power failure can also occur if the Internet or power line is disconnected due to a possible fire. The air-Q offline alarm is thus an important safety function that triggers a push message or mail message when something is wrong.
The offline alarm is based on the analysis of the uploads that the air‑Q sends to the air-Q Cloud. If the expected data stream is interrupted, an offline alarm is triggered.
Fire alarm and smoke alarm with push / mail messages
01
The air-Q has an integrated fire alarm (or smoke alarm), which triggers an acoustic and visual alarm on the device. Through the connection of several high-quality sensors, the air-Q acts as a very fine and precise smoke detector that triggers decisively earlier. Optionally, the fire / smoke alarm can also be configured as a push message and mail notification.
Depending on the presence of the corresponding sensors, the fire alarm is triggered at the following thresholds:
Note: The air-Q cannot be used as a legal smoke detector, as requirements for installation location and independence from mains power are not met for this. The air-Q is powered by a power cable and not by batteries. However, the air-Q can complement the existing smoke detector, already to potentially dangerous situations through more sensors more accurately detect and notify and thus also - possibly decisively - earlier alarm.
Limit values for the air-Q fire / smoke alarm
Depending on the presence of the corresponding sensors, the fire alarm is triggered at the following thresholds:
